Bump word-wrap from 1.2.3 to 1.2.4

Bumps [word-wrap](https://github.com/jonschlinkert/word-wrap) from 1.2.3 to 1.2.4.
- [Release notes](https://github.com/jonschlinkert/word-wrap/releases)
- [Commits](https://github.com/jonschlinkert/word-wrap/compare/1.2.3...1.2.4)

---
updated-dependencies:
- dependency-name: word-wrap
  dependency-type: indirect
...

Signed-off-by: dependabot[bot] <support@github.com>

.github/workflows/check-dist.yml

@@ -10,11 +10,9 @@ on:
   push:
     branches:
       - main
-    paths-ignore:
-      - '**.md'
   pull_request:
-    paths-ignore:
-      - '**.md'
+    branches:
+      - main
   workflow_dispatch:
 
 jobs:
@@ -22,32 +20,33 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v3
 
-      - name: Setup Node 20
-        uses: actions/setup-node@v4
+      - name: Setup Node 16
+        uses: actions/setup-node@v3
         with:
-          node-version: 20.x
+          node-version: 16.x
           cache: 'npm'
-
+  
       - name: Install dependencies
         run: npm ci
 
-      - name: Rebuild the dist/ directory
+      - name: Move the committed index.js file
+        run: mv dist/index.js /tmp
+
+      - name: Rebuild with tsc
         run: npm run build
 
-      - name: Compare the expected and actual dist/ directories
-        run: |
-          if [ "$(git diff --ignore-space-at-eol dist/ | wc -l)" -gt "0" ]; then
-            echo "Detected uncommitted changes after build.  See status below:"
-            git diff
-            exit 1
-          fi
+      - name: Rebuild the index.js file
+        run: npm run release
+
+      - name: Compare the expected and actual index.js files
+        run: git diff --ignore-all-space dist/index.js /tmp/index.js
         id: diff
 
       # If index.js was different than expected, upload the expected version as an artifact
-      - uses: actions/upload-artifact@v4
+      - uses: actions/upload-artifact@v3
         if: ${{ failure() && steps.diff.conclusion == 'failure' }}
         with:
-          name: dist
-          path: dist/
+          name: index.js
+          path: dist/index.js

.github/workflows/licensed.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     name: Check licenses
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v2
       - run: npm ci
       - name: Install licensed
         run: |

.github/workflows/test.yml

@@ -1,5 +1,4 @@
 name: Test
-
 on:
   push:
     branches:
@@ -11,6 +10,7 @@ on:
       - '**.md'
 
 jobs:
+
   build:
     name: Build
 
@@ -23,12 +23,12 @@ jobs:
 
     steps:
     - name: Checkout
-      uses: actions/checkout@v4
+      uses: actions/checkout@v3
 
-    - name: Setup Node 20
-      uses: actions/setup-node@v4
+    - name: Setup Node 16
+      uses: actions/setup-node@v3
       with:
-        node-version: 20.x
+        node-version: 16.x
         cache: 'npm'
 
     - name: Install dependencies
@@ -54,26 +54,33 @@ jobs:
         mkdir -p path/to/dir-3
         echo "Lorem ipsum dolor sit amet" > path/to/dir-1/file1.txt
         echo "Hello world from file #2" > path/to/dir-2/file2.txt
+        echo "This is a going to be a test for a large enough file that should get compressed with GZip. The @actions/artifact package uses GZip to upload files. This text should have a compression ratio greater than 100% so it should get uploaded using GZip" > path/to/dir-3/gzip.txt
 
     # Upload a single file artifact
     - name: 'Upload artifact #1'
       uses: ./
       with:
-        name: 'Artifact-A-${{ matrix.runs-on }}'
+        name: 'Artifact-A'
         path: path/to/dir-1/file1.txt
 
-    # Upload using a wildcard pattern
+    # Upload using a wildcard pattern, name should default to 'artifact' if not provided
     - name: 'Upload artifact #2'
       uses: ./
       with:
-        name: 'Artifact-Wildcard-${{ matrix.runs-on }}'
         path: path/**/dir*/
 
-    # Upload a multi-path artifact
+    # Upload a directory that contains a file that will be uploaded with GZip
     - name: 'Upload artifact #3'
       uses: ./
       with:
-        name: 'Multi-Path-Artifact-${{ matrix.runs-on }}'
+        name: 'GZip-Artifact'
+        path: path/to/dir-3/
+
+    # Upload a directory that contains a file that will be uploaded with GZip
+    - name: 'Upload artifact #4'
+      uses: ./
+      with:
+        name: 'Multi-Path-Artifact'
         path: |
           path/to/dir-1/*
           path/to/dir-[23]/*
@@ -81,9 +88,9 @@ jobs:
 
     # Download Artifact #1 and verify the correctness of the content
     - name: 'Download artifact #1'
-      uses: actions/download-artifact@v4
+      uses: actions/download-artifact@v3
       with:
-        name: 'Artifact-A-${{ matrix.runs-on }}'
+        name: 'Artifact-A'
         path: some/new/path
 
     - name: 'Verify Artifact #1'
@@ -101,9 +108,9 @@ jobs:
 
     # Download Artifact #2 and verify the correctness of the content
     - name: 'Download artifact #2'
-      uses: actions/download-artifact@v4
+      uses: actions/download-artifact@v3
       with:
-        name: 'Artifact-Wildcard-${{ matrix.runs-on }}'
+        name: 'artifact'
         path: some/other/path
 
     - name: 'Verify Artifact #2'
@@ -120,11 +127,31 @@ jobs:
         }
       shell: pwsh
 
-    # Download Artifact #4 and verify the correctness of the content
-    - name: 'Download artifact #4'
-      uses: actions/download-artifact@v4
+    # Download Artifact #3 and verify the correctness of the content
+    - name: 'Download artifact #3'
+      uses: actions/download-artifact@v3
       with:
-        name: 'Multi-Path-Artifact-${{ matrix.runs-on }}'
+        name: 'GZip-Artifact'
+        path: gzip/artifact/path
+
+    # Because a directory was used as input during the upload the parent directories, path/to/dir-3/, should not be included in the uploaded artifact
+    - name: 'Verify Artifact #3'
+      run: |
+        $gzipFile = "gzip/artifact/path/gzip.txt"
+        if(!(Test-Path -path $gzipFile))
+        {
+            Write-Error "Expected file do not exist"
+        }
+        if(!((Get-Content $gzipFile) -ceq "This is a going to be a test for a large enough file that should get compressed with GZip. The @actions/artifact package uses GZip to upload files. This text should have a compression ratio greater than 100% so it should get uploaded using GZip"))
+        {
+            Write-Error "File contents of downloaded artifact is incorrect"
+        }
+      shell: pwsh
+
+    - name: 'Download artifact #4'
+      uses: actions/download-artifact@v3
+      with:
+        name: 'Multi-Path-Artifact'
         path: multi/artifact
 
     - name: 'Verify Artifact #4'